The MH20i Manual probe head offers modular flexibility. It is the perfect solution for any user who is looking to enhance the performance of their manual CMM system.
Specifically, this probe head has a flexible platform with an integral TP20 probe body. It combines the TP20 kinematic stylus module mount with two axis indexing.
The MH20i platform enables flexible stylus changing and repeatable probe re-orientation. Furthermore, the user can combine probe and stylus changing, for optimum CMM functionality.
A manually adjusted lever locks the head into one of its 168 repeatable positions. The A-axis rotates through ±180° in the X-Y plane, the B-axis rotates through 90° in the Z plane and a lever locks the head in one of up to 168 repeatable positions, set at 15° increments.
The MH20i Manual Probe Head is capable of carrying the full range of TP20 modules. These modules can be changed without re-qualification, providing qualification has taken place in each position with each stylus/module combination.
|Probe mounting||TP20 kinematic mount|
|Heads mounting||MS range of shanks|
|Suitable interface||PI 4-2|
|No. of probe sockets||1|
|Probe status indication||1 LED|
|Cable connection||5 pin DIN 180º socket|
|A-axis indexing||0° to 90° in 15° repeatable steps|
|B-axis indexing||180° in 15° repeatable steps|
|Repeatability of position||1.5 µm (0.00006 in) (TP20 and 10 mm stylus fitted) |
2.5 µm (0.0001 in) (EM2 extended module and 10 mm stylus)
|Maximum extension bar||EM2 extension module - 75 mm (2.95 in)|