Inspect large or heavy parts with tiny precision features — in one setup.
FlexPoint is a large-format multisensor CMM that combines tactile scanning, telecentric video,
and interferometric laser measurement on one VersaFlex head — so you measure everything
without re-fixturing or sensor-changeover delays.
- One setup, one program: tactile + optical + laser ready at once.
- Cut inspection bottlenecks: eliminate rack changes and re-qualification time.
- Consolidate capability: replace multi-machine workflows with one platform.
Serving [Target States] • Local apps support • Fast installation & verification
2-minute demo: large part + micro features + instant sensor switching.
Where FlexPoint wins
- Large/heavy parts with small GD&T features requiring micron-level verification.
- Mixed-feature parts needing tactile + optical + laser in one routine.
- Inspection bottlenecks from sensor swaps or multiple machines.
- Production-floor or automation-cell inspection environments.
Not ideal for
- Very small parts fully served by benchtop vision systems.
- Single-sensor tactile inspection with no optical/laser needs.
Three sensors. One setup. Zero changeover downtime.
FlexPoint keeps tactile scanning, telecentric video, and TeleStar laser measurement
available simultaneously on the VersaFlex multisensor head — so alignment never breaks.
Tactile scanning
Datums, bores, freeform geometry, high-accuracy probing.
Telecentric video
Tiny holes, edges, fragile or delicate features.
Interferometric laser
Surfaces, gaps, dense point clouds, reflective areas.
Switch sensors instantly inside one program — no rack change, no re-qualification, no second setup.
What shops typically gain with FlexPoint
- 25–50% fewer setups on large parts with micro features.
- 30–40% faster inspection cycles by removing sensor changeover and re-fixturing.
- Consolidation of capability from multiple machines into one workflow.
FlexPoint in the wild
Aerospace / Large bracket
Pain: 3 setups across bridge CMM + vision.
Result: one setup; inspection time down ~35%.
Sensors: tactile scan + telecentric video.
Automotive-EV / Casting
Pain: laser checks required a second cell.
Result: single-cell inspection; eliminated a second machine.
Sensors: tactile + TeleStar laser.
Plastics-Mold / Large tool
Pain: optical features separate from freeform geometry.
Result: combined routine speeds FAIs.
Sensors: video + tactile scan.
One software workflow across every sensor
FlexPoint runs through ZONE3 so tactile, optical, and laser measurements live in the same CAD-based program.
Your team learns one interface, not three.
- Program to CAD with GD&T.
- Re-use routines across part families.
- One combined report for multi-sensor results.
Choose the FlexPoint that fits your parts
Sizes
- FlexPoint 7 Series — [Travel range / envelope]
- FlexPoint 9 Series — [Travel range / envelope]
- FlexPoint 12 Series — [Travel range / envelope]
Sensors
- Scanning tactile probe (SP25 series)
- Telecentric video (SmartProbe / optics packages)
- Interferometric laser (TeleStar)
- [Other common configuration you sell]
Tell us your part size & features → we’ll recommend a configuration
Why FlexPoint beats separate CMM + vision + laser steps
Before FlexPoint
- Multiple setups
- Sensor rack changes
- More fixtures
- Separate reports
- Multiple machines/contracts
With FlexPoint
- One setup
- Instant sensor switching
- Fewer fixtures
- One ZONE3 report
- One platform
If your inspection needs more than one sensor type, FlexPoint usually pays back by removing steps.
FlexPoint systems are designed and built by OGP to deliver stable accuracy and shop-floor durability.
Let’s prove FlexPoint on your toughest part.
Bring a part in or send a CAD file. We’ll run a full multisensor routine and return a report
so you can compare cycle time and capability to your current process.
Contact: [Rep Name] • [Phone] • [Email] • Serving [States]