Search results
SP25M Scanning Probe System
Manufacturer: Renishaw
At just 25 mm diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.
At just 25 mm diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.
Datum Spheres
Manufacturer: Renishaw
A range of spheres for the probe qualification purpose, set on a stem that can be adjusted for a wide range of qualification angles.
A range of spheres for the probe qualification purpose, set on a stem that can be adjusted for a wide range of qualification angles.
Extension Kits
Manufacturer: Renishaw
Extension Bars
Manufacturer: Renishaw
These bars are used to extend the reach of the probe from the CMM quill. Extension bars allow further penetration into inaccessible parts without degrading
accuracy.
These bars are used to extend the reach of the probe from the CMM quill. Extension bars allow further penetration into inaccessible parts without degrading
accuracy.
Stylus Extensions
Manufacturer: Renishaw
Stylus Extensions - carbon fibre stems, titanium ends (stem diametre 11mm)
Stylus Extensions - carbon fibre stems, titanium ends (stem diametre 11mm)
Star Stylus
Manufacturer: Renishaw
Cylinder Styli
Manufacturer: Renishaw
Star Stylus Centres
Manufacturer: Renishaw
Disk Styli
Manufacturer: Renishaw
Parallel Hemispherical-Ended Styli (Tungsten Carbide)
Manufacturer: Renishaw
Ruby Ball Styli (Carbon Fiber Stems)
Manufacturer: Renishaw
Ruby Ball Styli (Ceramic Stems)
Manufacturer: Renishaw
Ruby Ball Styli ( Stainless Steel Stems)
Manufacturer: Renishaw
Ruby Ball Styli (Tungsten Carbide Stems)
Manufacturer: Renishaw
Stylus Extension (Carbon Fibre)
Manufacturer: Renishaw
Special Purpose Styli
Manufacturer: Renishaw
Stylus Extension (Ceramic)
Manufacturer: Renishaw
Stylus Extension (Stainless Steel)
Manufacturer: Renishaw
Disc and Hollow Ball Styli
Manufacturer: Renishaw
Ruby Ball Styli (Carbon Fibre Stems)
Manufacturer: Renishaw
Ruby Ball Styli (Ceramic)
Manufacturer: Renishaw
Ruby Ball Styli (Stainless Steel Stems)
Manufacturer: Renishaw
Ruby Ball Styli (Tungsten Carbide Stems)
Manufacturer: Renishaw
Stylus Extension (Carbon Fibre)
Manufacturer: Renishaw
Star Styli (Fixed)
Manufacturer: Renishaw
Stylus Extensions (Ceramic)
Manufacturer: Renishaw
Stylus Extensions (Stainless Steel)
Manufacturer: Renishaw
Star Styli
Manufacturer: Renishaw
Digitizing Styli
Manufacturer: Renishaw
Disc Styli
Manufacturer: Renishaw
Disc probe
Disc probe
Hemispherical Anodized Aluminum Ball Styli (Imperial)
Manufacturer: Renishaw
Ruby Ball Styli
Manufacturer: Renishaw
Ruby Ball Styli (Ceramic Stems)
Manufacturer: Renishaw
Ruby Ball Styli (Stainless Steel)
Manufacturer: Renishaw
Ruby Ball Styli (Tungsten Carbide Stems)
Manufacturer: Renishaw
Stylus Crank
Manufacturer: Renishaw
Stylus Crank Screws and Crash Protection Devices
Manufacturer: Renishaw
Stylus Extensions
Manufacturer: Renishaw
Swivel Adaptor
Manufacturer: Renishaw
Adaptors
Manufacturer: Renishaw
Stylus Knuckles
Manufacturer: Renishaw
Stylus Centres
Manufacturer: Renishaw
MH20
Manufacturer: Renishaw
The MH20 incorporates the TP20 kinematic mount with two axis adjustable swivel.
The MH20 incorporates the TP20 kinematic mount with two axis adjustable swivel.
MH8
Manufacturer: Renishaw
The MH8 is a compact, indexable probe designed for use on small manual CMMs. As the probe head is positionally repeatable in 168 positions, the CMM
operator need only qualify the required probe positions once during set up.
The MH8 is a compact, indexable probe designed for use on small manual CMMs. As the probe head is positionally repeatable in 168 positions, the CMM
operator need only qualify the required probe positions once during set up.
MH20i
Manufacturer: Renishaw
The MH20i incorporates the TP20 kinematic mount with two axis indexing.
The MH20i incorporates the TP20 kinematic mount with two axis indexing.
MIH
Manufacturer: Renishaw
The manually indexable head (MIH) that is positionally repeatable in 720 positions
The manually indexable head (MIH) that is positionally repeatable in 720 positions
PH6 System
Manufacturer: Renishaw
A compact, vertical probe head for a single M8 probe
A compact, vertical probe head for a single M8 probe
General Purpose Styli
Manufacturer: Renishaw
HCU1
Manufacturer: Renishaw
A hand-held manual head drive and position display unit for use with PHC50 and PHC10-2 motorised head controllers.
A hand-held manual head drive and position display unit for use with PHC50 and PHC10-2 motorised head controllers.
PH10MQ
Manufacturer: Renishaw
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself.
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself.
PH10M
Manufacturer: Renishaw
The PH10M and PH10MQ can carry long extension bars and complex probes such as SP600M or TP7M.
The PH10M and PH10MQ can carry long extension bars and complex probes such as SP600M or TP7M.
PH10T
Manufacturer: Renishaw
The PH10T is an M8 version of the PH10M. All M8 threaded probes and extension bars fit directly onto the head.
The PH10T is an M8 version of the PH10M. All M8 threaded probes and extension bars fit directly onto the head.
PHC10-2
Manufacturer: Renishaw
The PHC10-2 controls any one of the PH10T, PH10M or PH10MQ heads based on commands received from either the CMM controller or the HCU1 (if fitted).
The PHC10-2 controls any one of the PH10T, PH10M or PH10MQ heads based on commands received from either the CMM controller or the HCU1 (if fitted).
Digitizing Styli Kits (Inch)
Manufacturer: Renishaw
Digitizing Styli Kits (Metric)
Manufacturer: Renishaw
SP25M Scanning Probe System
Manufacturer: Renishaw
At just 25 mm diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.
At just 25 mm diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.
TP20 Modules
Manufacturer: Renishaw
Seven probe module options are available, each with a pre-set trigger force designed to ensure maximum probe performance when using different stylus configurations.
Seven probe module options are available, each with a pre-set trigger force designed to ensure maximum probe performance when using different stylus configurations.
TP2
Manufacturer: Renishaw
TP2 5-way is the industry-standard probe for most CMM applications. Its compact dimensions are ideal for probing into restricted component features.
TP2 5-way is the industry-standard probe for most CMM applications. Its compact dimensions are ideal for probing into restricted component features.
TP20 Systems
Manufacturer: Renishaw
The TP20 probe system is ideal for complex part measurement, where a range of stylus configurations is needed to access all features on the part.
The TP20 probe system is ideal for complex part measurement, where a range of stylus configurations is needed to access all features on the part.
TP200
Manufacturer: Renishaw
A probe system using strain-gauge mechanisms for higher accuracy and increased life than kinematic touch trigger probes.
A probe system using strain-gauge mechanisms for higher accuracy and increased life than kinematic touch trigger probes.
TP6
Manufacturer: Renishaw
The TP6 combines the robust characteristics of the TP1 (S) with the repeatability of the TP2.
The TP6 combines the robust characteristics of the TP1 (S) with the repeatability of the TP2.
ML10 Gold Standard Laser
Manufacturer: Renishaw
This product has now been officially superseded by the XL-80 laser measurement system which were launched in March 2007. The XL-80 laser and XC-80 compensator are shown on top of the ML10 and EC10 units.
This product has now been officially superseded by the XL-80 laser measurement system which were launched in March 2007. The XL-80 laser and XC-80 compensator are shown on top of the ML10 and EC10 units.
XL-80 Laser Measurement System
Manufacturer: Renishaw
The new Renishaw XL-80 laser measurement system offers high performance calibration for motion systems, including CMMs and machine tools.
The new Renishaw XL-80 laser measurement system offers high performance calibration for motion systems, including CMMs and machine tools.
QC20-W Ballbar System
Manufacturer: Renishaw
With the new QC20-W ballbar system, telescoping ballbar testing has become even simpler and more powerful.
With the new QC20-W ballbar system, telescoping ballbar testing has become even simpler and more powerful.
Great Deals
Be the first to find out
Leica LTD 500 Laser Tracker
$US 60,000.00
SMR Axyz Software Inspection Cart & Computer System CMM#182
more details
Leitz PMM 18.10.10
$US 145,000.00
70x40x40" (XYZ) PCDMIS CAD++ CMM #183 Remanufactured 2010
more details
LK G80K Gantry CMM
$US 0.00
6000x3500x2000 (XYZ) Virtual DMIS CMM#322 *Contact us for Price
more details
Sheffield RS-150 CMM
$US 71,000.00
1200x2000x1000mm XYZ PC-DMIS Measuring Software CMM312 *image not actual machine
more details
Sheffield RS-170 CMM
$US 78,000.00
1524X1753X1219mm (XYZ) Measuremax CMM Software CMM#299 image is not the actual machine
more details