Ayr Location
2492 Cedar Creek Road, #4
Ayr, Ontario N0B 1E0
Phone: (905) 819-7878
1- 800-606-9266
Tech Tips
I have performed an alignment with a CAD model. However when I execute the
"CAD=Part" command my measured features do not line up with my CAD model. What happened? Also the "CAD = Part"
command is now missing from my alignment dialogue window.
The alignment you have created does not have the same origin and axis directions as your CAD model. You need to reevaluate your alignment and ensure that the alignment that you create is the same alignment that the CAD model is using. You may edit your existing alignment and re-execute the command "CAD = Part". You will find another shortcut to the "CAD=Part" command under the "Operation" -> "Graphics display window" pull down menu.
What is the difference between Datapage and Dataview?
Datapage contains
the database of all stored program executions and creates SPC reports and charts. Dataview uses your cad
model to visually display these results to the specific locations on the cad ...
What is the difference between Datapage and Dataview?
