Ayr Location
2492 Cedar Creek Road, #4
Ayr, Ontario N0B 1E0
Phone: (905) 819-7878
1- 800-606-9266
Tech Tips
How do I modify my Measuremind 3D program to add output
to QC-Calc?
1) Open the program you wish to configure for QC-Calc in Measure-mind 3D.
2) Select Part Setup -> Run Overrides.
3) Select the Stats button.
4) Place a check next to ALL and Keep Stats Filename.
5) You will now be prompted for a file name. Use the name QC.STA and ensurethat this file is stored in the C:\Partrtn directory.
6) Select save to close the Filename dialog.
7) Select OK and then Close to exit from the Run Overrides dialog.
8) Save your part program.
If I decide to switch to a 64 bit windows operating system can I use the
drivers from the 32 bit windows version? An example of this would be the HASP driver for Pcdmis.
No. You
can run 32 bit programs on a 64 bit operating system but you will not be able ...
If I decide to switch to a 64 bit windows operating system can I use the
drivers from the 32 bit windows version? An example of this would be the HASP driver for Pcdmis.
