When I measure a Point with the Portable Arm, the measurement is inaccurate. If I use the 15mm ball, I get an approximate error of 7.5mm. If I am using the 6mm ball, I get about a 3mm error. What is happening?
Ayr Location
2492 Cedar Creek Road, #4
Ayr, Ontario N0B 1E0
Phone: (905) 819-7878
1- 800-606-9266
Tech Tips
My Pcdmis reports are always displayed as text only. How do I set a
different report style for my program to use?
Locate the "View" pull down in Pcdmis and select the "Report Window" option. The icons on the right side of the toolbar will allow you to view and try out various different report formats. The icon to the right of the Printer icon will allow you to save the chosen report as the default for the program. Ensure that you save your part program to save this change to the report format.
When I measure a Point with the Portable Arm, the measurement is inaccurate. If I use the 15mm ball, I get an approximate error of 7.5mm. If I am using the 6mm ball, I get about a 3mm error. What is happening?
