Ayr Location
2492 Cedar Creek Road, #4
Ayr, Ontario N0B 1E0
Phone: (905) 819-7878
1- 800-606-9266
Tech Tips
I just bought a new probe for my Romer Arm. Cimcore Arm Utilities cannot recognize this probe. What should I do?
Separately purchased probes for the Romer Arms come either with a 3.5" floppy disk or a USB stick containing the probe file (i.e. PROBE.6). Copy this file to the ARMDATA and ARMDATA.S6X folders located in "C:\Program Files\CIMCORE\WinRDS". The next time you start Cimcore Arm Utilities (aka WinRDS) the probe will be recognized. Note: You must calibrate this probe before use.
On my global machine when scanning with the SP600 probe there is a long delay between each line of points scanned. What is the cause of this?
Using an analog probe such as an SP600 or SP25 on a Leitz protocol controller works better when using the Ethernet ...
On my global machine when scanning with the SP600 probe there is a long delay between each line of points scanned. What is the cause of this?
