Tech Tips

To Export your measured data to Excel perform the following steps:

1.Setup the export options to use by selecting "System" -> "Configuration" -> "Output" from the pull down menu.

2.Select the Smart Report tab and locate the "Data Export" area of the dialog.

3.Next, Specify the output file name and the version of Excel to be used. You may also
  specify the number of part runs to save.
  
4. Measure or construct any feature that you wish to send to Excel. From inside the measurement or construction dialog, set the output to Export by choosing the Export report icon in the list of output options.

5.  Use the "Tolerances Tab" to set the appropriate Nominals and Tolerances for the feature.

6.  Place a check mark next to each axis you wish to output.

7.  Perform steps 4 through 6 for as many features as you wish to report.

8. Save and run your program and Smart Report will pop and allow the exportation of your results.