Proper circle measurement techniques in cmm programming
Learn proper measurement techniques using PC DMIS in CMM programming – an argument for measuring diameters with greater than 90 degrees of arc.
http://www.cmmxyz.com/website/Training/Training-home.html
Ayr Location
2492 Cedar Creek Road, #4
Ayr, Ontario N0B 1E0
Phone: (905) 819-7878
1- 800-606-9266
Tech Tips
On my global machine when scanning with the SP600 probe there is a long delay between each line of points scanned. What is the cause of this?
Using an analog probe such as an SP600 or SP25 on a Leitz protocol controller works better when using the Ethernet link between the controller and computer. The serial connection is too slow for scanning purposes.
Proper circle measurement techniques in cmm programming
