I have performed an alignment with a CAD model. However when I execute the
"CAD=Part" command my measured features do not line up with my CAD model. What happened? Also the "CAD = Part"
command is now missing from my alignment dialogue window.
|
||
 |
||
Touch Trigger Probes |
||
TP2
Manufacturer: Renishaw
TP2 5-way is the industry-standard probe for most CMM applications. Its compact dimensions are ideal for probing into restricted component features. 
TP6
Manufacturer: Renishaw
The TP6 combines the robust characteristics of the TP1 (S) with the repeatability of the TP2.
TP200
Manufacturer: Renishaw
A probe system using strain-gauge mechanisms for higher accuracy and increased life than kinematic touch trigger probes.
TP20 Systems
Manufacturer: Renishaw
The TP20 probe system is ideal for complex part measurement, where a range of stylus configurations is needed to access all features on the part.
TP20 Modules
Manufacturer: Renishaw
Seven probe module options are available, each with a pre-set trigger force designed to ensure maximum probe performance when using different stylus configurations.
|
| 1.800.606.9266 Sales@CMMXYZ.com Support@CMMXYZ.com Training@CMMXYZ.com | |||||||||||||||||||||||
|
|||||||||||||||||||||||
 |
|||||||||||||||||||||||
| Copyright © 1998-2007 Canadian Measurement-Metrology Inc. | Web design by Modulus Media Toronto Web Design |