1.800.606.9266 Sales@CMMXYZ.com Support@CMMXYZ.com Training@CMMXYZ.com

Motorized Indexing Heads

CMM New and Used Motorized Indexing Heads - 1
HCU1 Manufacturer: Renishaw
A hand-held manual head drive and position display unit for use with PHC50 and PHC10-2 motorised head controllers.
CMM New and Used Motorized Indexing Heads - 2
PH10MQ Manufacturer: Renishaw
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself.

CMM New and Used Motorized Indexing Heads - 3
PH10M Manufacturer: Renishaw
The PH10M and PH10MQ can carry long extension bars and complex probes such as SP600M or TP7M.
CMM New and Used Motorized Indexing Heads - 4
PH10T Manufacturer: Renishaw
The PH10T is an M8 version of the PH10M. All M8 threaded probes and extension bars fit directly onto the head.
CMM New and Used Motorized Indexing Heads - 5
PHC10-2 Manufacturer: Renishaw
The PHC10-2 controls any one of the PH10T, PH10M or PH10MQ heads based on commands received from either the CMM controller or the HCU1 (if fitted).